Configuration for Online Service Providers

Steps to configure Your SPA-2000 with Deltathree / iconnecthere

1. If you haven't already done so, sign up for an account at www.iconnecthere.com.

2. Open a session to the SPA by typing: http://<spa ip address>.
To find out the IP address, please lift up your handset, press **** (voice menu) then press 110#

3. Click "Admin Login" in the upper right hand corner, then click "Advanced"

4. The browser will show a tabbed user interface. Select the Line 1 tab to configure a service for line 1.
Line 2 can also be configured from the Line 2 tab.

Line Configuration:

Click "Advanced" at the bottom of the page.

Click "Line 1" tab, and enter the following in the available fields:

Set Proxy to: natrelay.deltathree.com

Set Outbound Proxy to: natrelay.deltathree.com

Set "Use Outbound Proxy" to: yes

Set User ID to your assigned receiving calls phone number (e.q. 12125554321)

Set "NAT keep Alive" to "yes"

Set "Register" to "yes"

Set "Register Expires" to 300

Set Auth ID to your 8-digit account number

Set User Auth ID to yes

Set Display Name to an identifier to be displayed on callee's CallerID.

Set Password to your account's password (e.q. YYYYY)

Set "Use ObProxy in Dialog" to: yes

Click "Provisioning" tab, set Provisioning Enable: no

Press the Submit All Changes at the bottom of the web page

5. The Registration State in the Info tab should now display "Registered"

For more information, please refer to iconnecthere's online help section

Recommended Dia lPlan Setting

(DialPlan can be at t he bottom page of your line 1 or line 2 tab at:
http://<spa ip address >
Click "Admin Login", then click "advanced")

You can copy and paste the below configuration to your spa:
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)

---

Email: sipura-support@external.cisco.com
Fax: 408-955-9855

General Technical Support Hours: 9:00am to 5:00pm PST